The cone crusher high temperature Cause and Treatment Method
The cone crusher high temperature reasons:
1.Oil pump wear lead to oil supply shortage.
2.Enough the operation gap between the spindle and the spindle bushing.
3. oil can not be properly discharged.
4.Crusher liners used improperly.
5. Caused by hot materials or unusually hard material crusher overheating.
6.The Insufficient clearance, the oil flow of the lower surface portion of the top surface of the eccentric sleeve and bowl creel poor.

The crusher temperature approaches:
1.Check in the return pipe oil is accurate.
2 as a benchmark, the concave portion of the bowlic watts check bowlic watts and somatic spherical wear. Body surface should be smooth, without any visible rib.
3.Check tilt to the side of the vent hood cleaning drive shaft from the crusher to the fuel tank drain line.
4. Material too much broken in the lower part of the crushing chamber, resulting in excessive power consumption.
5 oil coolers installed in accordance with the actual situation.