Care and maintenance of hydraulic cone crusher lubrication system
1, gear oil pump shaft seal should always check for any leaks or damage phenomena should be replaced immediately.
2 cooling fan condenser use must be based on usage, every 5-10 hours once the condenser the mesh internal inspection and cleaning. Air compressor to blow dry dust mesh.
3, the routine cleaning of monocular comb the oil filter every three months time, as the pressure drop over the 0.05Mpa should be cleaned or replaced immediately.

The initial use because the equipment is still in the stage, the oil return magnetic mesh filter should be cleaned once a week; When the device is working properly after three months, back to the oil magnetic mesh filters should be cleaned once a month.